Specification:Timing Range: 0.01s-9999min continuously adjustableTrigger Signal Source: High Level Trigger (3.0V~24V), Low Level Trigger (0.0V~0.2V), Switching Quantity Control (Passive Switch)Output Capability: Can control devices within 30V 5A or within 220V 5AQuiescent Current: 15mAOperating Current: 50mAService Life: >100,000 timesWorking Temperature: -40~85°CSize: 88x3.8x1.9cm / 3.15x1.5x0.75in How to Choose Timing Range:In the OP/CL parameter modification interface, short press the STOP button to select the timing range:XXXX: Timing range is 1s~9999sXXX.X: Timing range is 0.1s 999.9sXX.XX: Timing range is 0.01s to 99.99sX.X.X.X: Timing range is 1min to 9999min Additional Function:a) Auto sleep function: In the running interface, press or hold the STOP button to activate or deactivate the auto sleep function (L-P select on to start the sleep function, off to turn off the sleep function);b) Relay function selection: In the operation interface, the relay function is activated or deactivated by short pressing the STOP button, 'on' meets the conduction condition, the relay is normally turned on, and 'OFF' meets the conduction condition, and the relay is not turned on; 'OFF' In the state, the system flashes 'OUT';c) Parameter view: In the running interface, short press the SET button to display the current parameter settings of the system, which does not affect the normal operation of the system;d) Display content switching: In P-5 P-6 mode, switch the display content (run time/cycle number) by short pressing the DOWN button; Package List:1 x Delay Relay Module